Powering On Airmonitor Plus

Modified on Fri, 13 Nov at 1:48 PM

In most cases, Airmonitor Plus powers on automatically when you connect it to a 5V/2A USB power supply using the supplied USB-C cable. It starts monitoring your indoor air straight away.

QUICK ANSWER Not turning on by itself? Press and hold the multifunction button on the back for about 3 seconds, then let go when the display lights up.
STEP BY STEP

If it doesn't power on automatically

1Find the multifunction button on the back of Airmonitor Plus.
2Press and hold the button for about 3 seconds.
3Release the button when the display lights up.
Location of the multifunction button on the back of Airmonitor Plus Gen 1 and Gen 2 The multifunction button is on the back of both Gen 1 and Gen 2.
BEFORE YOU START

First-time setup

Before taking your first readings, we recommend:

✓Fully charge Airmonitor Plus
✓Calibrate the CO₂ sensor outdoors in fresh air
✓Connect Airmonitor Plus to Wi-Fi if you want to use the Breathe Tech app and cloud features

Once these steps are complete, Airmonitor Plus is ready for everyday use.

TROUBLESHOOTING

If Airmonitor Plus doesn't turn on

1Connect it to a 5V/2A USB power supply using the supplied USB-C cable.
2Let it charge for at least 30 minutes.
3Press and hold the multifunction button for about 3 seconds.
Still not turning on? Our support team is happy to help. Tell us your serial number and what you've tried so far. Contact support or email support@breathe-tech.com

Was this article helpful?

That’s Great!

Thank you for your feedback

Sorry! We couldn't be helpful

Thank you for your feedback

Let us know how can we improve this article!

Select at least one of the reasons
CAPTCHA verification is required.

Feedback sent

We appreciate your effort and will try to fix the article